This guide verifies that your Virtru Customer Hosted Gateway is publicly reachable on your configured SMTP port (e.g., 9000, 9001, 25, 587) and can send and receive traffic successfully.
1. Install Netcat (nc)
RHEL / CentOS / Rocky / AlmaLinux:
sudo yum install -y nc # or sudo dnf install -y nc
Ubuntu / Debian:
sudo apt update sudo apt install -y netcat # or for enhanced features: sudo apt install -y netcat-openbsd
macOS (via Homebrew):
brew install netcat
Verify Installation:
nc -h
2. Check Server’s Public IP
On the Virtru Email Gateway server:
curl ifconfig.me
Example Output: 33.233.36.80 this your be your server external IP address
3. Start a Netcat Listener (Inbound Test)
On the gateway server:
nc -l -p <your defined port>
Alternatively: Confirm Postfix or another service is already listening:
sudo ss -tulnp | grep <your defined port>
4. Test Inbound Connectivity (From External Machine)
From an external system:
nc <public-ip> <your defined port>
Example:
nc 33.233.36.80 9001
Expected Output:
220 gw.yourdomain.com ESMTP gw.yourdomain.com
Success Criteria:
- Port is open
- DNS resolution works
- Server accepts SMTP connections
5. Troubleshooting Tips
- Ensure a listener is active on the specified port
- Verify firewall or cloud security rules allow TCP inbound on that port
-
Check listening services:
sudo ss -tulnp | grep <port>
Alternative Approaches
If you want to test if your server is reachable from the internet on your defined port, here are your options:
-
Use an Online Port Scanner:
6. Outbound Connectivity Test
From the gateway server, test outbound SMTP reachability:
nc smtp.gmail.com 587 #or for Microsot nc MX Record 25 #or custom nc 1.1.1.1 25
Example Expected Output:
220 smtp.gmail.com ESMTP ...
Conclusion
Netcat confirms inbound and outbound connectivity to/from your Virtru Email Gateway. Seeing the SMTP 220 banner verifies that the mail server is reachable and listening.